horizontal fiber optic splice closure

horizontal fiber optic splice closure 1.fiber optic closure two inlets and two outlets 2.installed on wall,direct-buried

  horizontal fiber optic splice closure

1.suitable for single core and ribbon fiber 2.installed on wall ,direct-buried ,aerial ,pipelined 3.single door

Detailed Product Description 

GJS702 is suitable for single core and ribbon fiber ,they are installed on wall ,direct-buried ,aerial ,pipelined

 

Horizontal Fiber optic splice closure of GJS702 is suitable for single core and ribbon fiber ,they are installed on wall ,direct-buried ,aerial ,pipelined .

Ø         The housing of box is made of high-grade PC plastic, the tray is made of ABS plastic ,these material to ensure the lifetime.

Ø         We use speical rubber to seal the cover ,which not only ensure the sealing proformance ,but also increases the oxidation resistance ,it completely reaches the repetition sealing requirements and realized the repetition use of the products.

Ø         The installation accessories provided:sealing tie 2pcs,sealing tape 1pc,pvc insulation tape 1pc,splice pipe ,nylon tie 4pcs,plastic spanner 1pc,sticker,hanging hook 2pcs,Hex key1pc

Main technical Indexes:

Ø         Seal performance : the pressure in the closure is 100Kpa,put the closure into the water for 15minutes,there is no air bubble ,and observed it for 24 hours ,there is no change of air pressure

Ø         Re-entry performance:after 3 times of normal operations ,it can still be up to the seal performance standard

Ø         Insulation resisitance: ≥2x104MΩ

Ø         Withstand voltage strength :there is no puncture and no arc-cover after the function of 15KVDC/1min.

Model	Dimension (MM)	G.W./N.W(kg)	Material	Inlet/Outlet	Diameter of fiber cable	Capacity of FOSC	Dimension /CTN (cm)
GJS702	470*240*110	1.7/1.3	PC	2inlets and 2outlets	Φ20mm	Bunchy:12-144(cores)

horizontal fiber optic splice closure